/
Logitech Sight

Logitech Sight

Owned by Theodore Huntington
Last updated: yesterday at 2:19 pm
3 min read

Tutorial on how to use the Logitech Sight in LL 110

How to Use the Logitech Sight in LL 110:

The Logitech Sight is the device fastened to the middle table (see image below):

IMG_2997-20250321-203817.JPG
Logitech Sight in LL 110

To use the Sight, set the Zoom Room to be in “Speaker Focus” using the touchpad tablet on the table. After you have started the meeting, touch the “View” button on the touchscreen (see below image).

image-20250327-210020.png

Then touch the “Speaker” button:

image-20250327-210332.png

The Sight will then show video squares of those people in the room that are speaking (or recently spoke) like the below image:

image-20250321-205040.png

When you are done using the Sight, please return the room back to the normal view mode using the touchpad tablet on the table.

How to Disable the Logitech Sight:

To disable the Sight, simply change the Zoom room out of “Speaker Focus” using the Tablet on the table. Once your meeting has started, touch the “View” button. You can select to one of the below options:

image-20250327-210659.png

  1. Multi-speaker View: (recommended view if not using Sight device) Multi-speaker view provides meeting participants a more engaging experience, dynamically adapting to current speakers by highlighting and enlarging their video tiles over others, while still providing a view of other participants in a smaller gallery view below.

  2. Thumbnail View: allows you to minimize the main Zoom window while keeping the video feed visible and accessible, allowing you to move it around your screen or hide it entirely.

  3. Gallery View: displays all participants in a grid, allowing you to see everyone simultaneously

  4. Speaker View: frames the active speaker in the room and provides a picture-in-picture view of the room. (*Note that this will enable the Logitech Sight device)

What do the two buttons on the side of the Logitech Sight do?

The two buttons on the side of the Sight are mute buttons. Pressing the button will turn the LED on the Sight red indicating that the camera is no longer active, in addition, this will mute all the room microphones. To unmute the cameras and microphones, simply press each button again and you should see the two LEDs on the Sight turn green again meaning that both cameras and all the room microphones are active again.

Troubleshooting:

  • There is no audio

    • Make sure that the Sight is not muted (there are two buttons, one button under each camera. Make sure the light is green above each of the buttons.

  • For all other issues, please reach out to he Library IT Department for assistance.

Related content