Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Push -- The method assumes you can discover the client computer from the Enterprise Console.  It also assumes that all the Minimum Requirements for Installation have been met on the client system.  Sophos Technical Support does not recommend this approach for large numbers of installations, in that, it puts a considerable strain on the Enterprise Console.  But, it can be recommended for one or a few installations at a time.  To install using "push", do the following from the Enterprise Console:
    1. Find New Computers -- You can do this from IP Address, Host Names, or Import from Active Directory.  Finding by IP Address seems to be the most straight-forward approach.  Importing from Active Directory can give you results, but there may be a lot of "stale" information in Active Directory that you may have to cull through in order to get to just the systems that are active.
    2. <Right Click> on the Computer in the Console / Select 'Protect Computers' -- You can highlight any number of client systems in the Enterprise Console window, and <Right Click> to protect all the computers selected
  2. Pull -- This approach is more labor intensive, in that, you have to initiate it from each client computer, usually from a remote desktop session on those computers.  Certain Minimum Requirements for Installation have to be met, but when you remote to a system as an administrator, it seems the process is a bit more forgiving than trying it from a "push".  You can use the following command line in order to "pull" the installation down from the Enterprise Console:

Version 9.7 -- Sophos Anti-Virus Command Line

\\SOPHOS0.ad.uci.edu\SophosUpdate\CIDs\S004\SAVSCFXP\Setup.exe -updp "\\SOPHOS0.ad.uci.edu\SophosUpdate\CIDs\S004\SAVSCFXP" -mng yes -crt R

...

The Global Group is broken up into two major parts -- Servers and Workstations.  Under each of those categories, the sub-groups are broken up by time and days.  Just drag and drop an Unassigned systems into one of the time/day based scanning sub-groups.

...