Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

Contacting the Library IT Helpdesk

  • If you need immediate assistance, please contact the Library IT HelpDesk at (949)-824-8535 and leave a message with a call back number. Someone from Library IT will call you back as soon as possible

1. Using the room with an Instructional Computer:

Note: you can either share content you have available online, on the instructional computer, or from a USB flash drive that you connect to the white USB extension cable on the lectern.

Set the monitor source to Display port

  1. Power on the Monitor

  2. Select DisplayPort as source

  3. Click OK to keep settings

Make sure the HDMI switch has the correct port selected:

  1. Press the SELECT button so that the green light is active over INPUT 1

Power on the Projector and set the SOURCE to PC:

  1. Press the power button to turn on the Projector

  2. Once the projector has fully powered on, ensure source is set to PC

3. Click, OK and you can start the meeting

2. Using the room with a Laptop:

Make sure the HDMI switch has the correct port selected:

  1. Press the SELECT button so that the green light is active over INPUT 2

  2. Connect the laptop to the black USB-C cable on the lectern

Power on the Projector and set the SOURCE to PC:

  1. Press the power button to turn on the Projector

  2. Once the projector has fully powered on, ensure source is set to PC

    1. Click, OK and you can start the meeting

3. Using the Room for a Zoom Call:

Set the Monitor source to HDMI:

  1. Power on the Monitor

  2. Select HDMI as source

  3. Click OK to keep settings

Power on the Projector and set the SOURCE to Zoom Room:

  1. Press the power button to turn on the Projector

  2. Once the projector has fully powered on, ensure source is set to Zoom Room

  1. Click, OK and you can start the zoom meeting

  • No labels