...
9) The Object Attachment Upload window will finish loading.
10) You will have three buttons to select from: 'Remove', 'Upload' and 'Select Files'.
11) Click on 'Select Files'. A small file selector window will pop up that will allow you to browse through your files to locate the file you wish to upload. Select the the disk drive your file resides on (C:, D:, E: etc.).
12) Locate the file you wish to upload to this job by clicking once on it. It will appear in the 'File Name' section of the small file selector window. If you wish to select multiple files, hold down the 'Ctrl' key of your keyboard while you click on each file you wish to upload.
13) Click on the 'Open' button, located at the bottom right corner of the small file selector window.
14) Your file(s) that you wish to upload will appear in the 'Object Attachment Upload' window with a status of 'Pending'. NOTE: Your document is not uploaded yet. At this point you can remove the document from the list if you feel that you selected the wrong document in step #12 by selecting the document and then clicking on the 'Remove' button.
15) Click on the 'Upload' button. This will upload your documents to this FACserv job. The 'Object Attachment Upload window will close and you will be returned to the 'Notes & Documents' tab.
16) In the 'Related Documents' section, you will see your document(s) that you had uploaded in the previous step.
17) If you are finished uploading documents to this job, click on the 'Activate' button in the upper right corner of the Job window.